Design structure and cleaning process of rubber plug cleaner

1.Sterilization method:Wet-sterilization Wet-sterilization is to increase the temperature of cleaning by using saturated steam to be sprayed into the cleaning tank,usually 121°C±1°C.The water in the saturated water vapor is used to hydrolyze the stable polymer(calcium)in the spore.On the other hand,water is directly related to the denaturation of protein nucleic acids caused by hydrolysis.As long as the sterilization temperature is controlled at 121°C±1°C during sterilization,a good sterilization effect can be achieved by maintaining a certain sterilization time.
2.After the dry rubber plug is processed through the above steps,the drying process is followed by the Zui.That is to remove the moisture on the surface of the rubber plug and the memory.

The[GMP"standard requires different moisture requirements for the rubber plug depending on the rubber plug application and packaging process.Therefore,for the total processing time of various types and structures of cleaning machines,it is necessary to first distinguish the processing quality indicators and processing methods of each program,and cannot be compared directly from numbers.